>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings
7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings


 
Our Price: CA$24.41
  • Item: 7201 Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 12mm x 32mm x 10mm/Metric
  • ID (inner diameter)/Bore: 12mm


    Product Code: KIT10011
  • Qty:

    Description
     

    7201 Nachi Angular Ball Bearing
    40 Contact Angle & Steel Cage
    Made in Japan


    "7201
    "7201

    7201 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 12mm, outer diameter is 32mm and width is 10mm.

    • Item: 7201 Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Steel Cage
    • Dimensions: 12mm x 32mm x 10mm/Metric
    • ID (inner diameter)/Bore: 12mm
    • OD (outer diameter): 32mm
    • Width/Height/thickness: 10mm
    • Size: 12 x 32 x 10 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 7,600 N
    • Static load rating Cor: 3,960 N
    • Limiting Speed:
      • Grease Lubrication: 20,000 RPM
      • Oil Lubrication: 27,000 RPM
    • Made in Japan

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    Kit10011


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.