6232 Nachi Bearing 160mm x 290mm x 48mm Made in Japan

6232 Nachi Bearing, Made in Japan, the 6232 inner diameter is 160mm, the 6232 outer diameter is 290mm, 6232 width is 48mm. Item: 6232 Nachi Ball Bearing Type: Nachi Deep groove Ball Bearing Radial Clearance: C3 Dimensions: 160mm x 290mm x 48mm/Metric ID (inner diameter)/Bore: 160mm OD (outer diameter): 290mm Width/Height/thickness: 48mm Size: 160 x 290 x 48 mm Quantity: One Bearing Dynamic load rating Cr: 185,000 N Static load rating Cor: 186,000 N Limiting Speed: Grease Lubrication: 2,100 RPM Oil Lubrication: 2,500 RPM Made in Japan

6232 Nachi Bearing Open C3 Japan 160x290x48 Extra Large kit12556

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery h