>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Metric Bearings > 15mm inner diameter Bearings >

6302 Nachi Bearing Open C3 Japan 15x42x13
6302 Nachi Bearing Open C3 Japan 15x42x13
6302 Nachi Bearing Open C3 Japan 15x42x13


 
Our Price: CA$14.90
  • Item: 6302 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 15mm x 42mm x 13mm/Metric
  • ID (inner diameter)/Bore: 15mm


    Product Code: KIT9867
  • Qty:

    Description
     
    6302 Nachi Bearing
    15mm x 42mm x 13mm
    Made in Japan


    6302 Nachi Bearing, Made in Japan, the 6302 inner diameter is 15mm, the 6302 outer diameter is 42mm and the 6302 width is 13mm.

    • Item: 6302 Nachi Ball Bearing
    • Type: Nachi Deep groove Ball Bearing
    • Radial Clearance: C3
    • Dimensions: 15mm x 42mm x 13mm/Metric
    • ID (inner diameter)/Bore: 15mm
    • OD (outer diameter): 42mm
    • Width/Height/thickness: 13mm
    • Size: 15 x 42 x 13 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 11,400 N
    • Static load rating Cor: 5,400 N
    • Limiting Speed:
      • Grease Lubrication: 17,000 RPM
      • Oil Lubrication: 21,000 RPM
    • Made in Japan

    Nachi Deep Groove Ball Bearings

    Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

    Kit9867


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.