6313NR Nachi Bearing 65mm x 140mm x 33mm With Snap Ring (C clip) Made in Japan

6313NR Nachi Bearing with a Snap Ring, the 6313NR inner diameter is 65mm, the 6313NR outer diameter is 140mm, 6313NR width is 33mm. Item: 6313NR Nachi Ball Bearing Type: Nachi Deep groove Ball Bearing Radial Clearance: C3 Dimensions: 65mm x 140mm x 33mm/Metric ID (inner diameter)/Bore: 65mm OD (outer diameter): 140mm Width/Height/thickness: 33mm Size: 65 x 140 x 33 mm Quantity: One Bearing Dynamic load rating Cr: 92,500 N Static load rating Cor: 59,500 N Limiting Speed: Grease Lubrication: 4,900 RPM Oil Lubrication: 6,000 RPM Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9958