>

Enter Your Email To Sign Up
For Our E-Newsletter:

  Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7001CYDUP4 Nachi Angular Contact Bearing 12x28x8 Abec-7 Japan Bearings
7001CYDUP4 Nachi Angular Contact 12x28x8 Abec-7 Japan
7001CYDUP4 Nachi Angular Contact 12x28x8 Abec-7 Japan
 
Our Price: CA$459.44
  • Item: 7001CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 12mm x 28mm x 8mm/Metric


    Product Code: 7001CYDUP4-NACHI-12288-JAPAN
    • Qty:

    Description
    		 

    High Precision Ball Bearings 7001CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 12mm x 28mm x 8mm Made in Japan 7001CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7001CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 12mm x 28mm x 8mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 28mm
  • Width/Height/thickness: 8mm
  • Size: 12 x 28 x 8 mm
  • Quantity: Pair of Bearings
  • Made in Japan Dimensions d D B r r1 a 12mm 28mm 8mm 0.3mm 0.15mm -1.7mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7001CYDUP4 Nachi Angular Contact Bearing 12x28x8 Abec-7 Japan Bearings


    		•

    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.