>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Metric Bearings > 20mm inner diameter Bearings >

7004CYDUP4BNLS Nachi Angular Contact Bearing 20x42x12:Abec-5:Japan
7004CYDUP4BNLS Nachi Angular Contact Bearing 20x42x12:Abec-5:Japan


 
Our Price: CA$226.19
  • Item: 7004CYDUP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 20mm x 42mm x 12mm/Metric
  • Bearing Inner Diameter: 20mm
  • Bearing Outer Diameter: 42mm


    Product Code: KIT10787
  • Qty:

    Description
     
    7004CYDUP4BNLS Nachi Angular Abec-7 Ball Bearing
    20mm x 42mm x 12mm
    15 Contact Angle
    Polyamide resin cage
    Made in Japan


    7004CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7004CYDUP4BNLS inner diameter is 320mm, 7004CYDUP4BNLS outer diameter is 42mm, 7004CYDUP4BNLS width is 12mm.

    • Item: 7004CYDUP4BNLS Angular Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Dimensions: 20mm x 42mm x 12mm/Metric
    • Bearing Inner Diameter: 20mm
    • Bearing Outer Diameter: 42mm
    • Bearing Width: 12mm
    • Size: 20 x 42 x 12 mm
    • Cage: Polyamide resin cage
    • Quality: Abec-7
    • Made in Japan
    • Quantity: One Bearing

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    Kit10787


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.