Products

Enter Your Email To Sign Up
For Our E-Newsletter:

Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7012CYP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Japan Bearings

7012CYP4 Nachi Angular Contact 60x95x18 Abec-7 Japan

Our Price: CA$630.69

Item: 7012CYP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 60mm x 95mm x 18mm/Metric

Product Code: 7012CYP4-NACHI-609518-JAPAN

Qty:

Description

High Precision Ball Bearing 7012CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 60mm x 95mm x 18mm Made in Japan 7012CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan. the 7012CYP4 inner diameter is 60mm, the 7012CYP4 outer diameter is 95mm, 7012CYP4 width is 18mm.

Item: 7012CYP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 60mm x 95mm x 18mm/Metric

ID (inner diameter)/Bore: 60mm

OD (outer diameter): 95mm

Width/Height/thickness: 18mm

Size: 60 x 95 x 18 mm

Quantity: One Bearing

Dynamic load rating Cr: 35,500 N

Static load rating Cor: 30,500 N

Limiting Speed:

Grease Lubrication: 10,000 RPM

Oil Lubrication: 14,000 RPM

Made in Japan Dimensions d D B r r1 a 60mm 95mm 18mm 1.1mm 0.6mm -0.1mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7012CYP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Japan Bearings

Share your knowledge of this product. Be the first to write a review »

7012CYP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Japan Bearings

Bearings Canada