Products

Enter Your Email To Sign Up
For Our E-Newsletter:

Home > Metric Bearings > 12mm inner diameter Bearings >

7201CYDUP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Bearings

7201CYDUP4 Nachi Angular Contact Bearing 12x32x10 Abec-7

Our Price: CA$431.93

Item: 7201CYDUP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearings

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 12mm x 32mm x 10mm/Metric

Product Code: 7201CYDUP4-NACHI-123210-ABEC-7

Qty:

Description

High Precision Ball Bearings 7201CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 12mm x 32mm x 10mm Made in Japan 7201CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

Item: 7201CYDUP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearings

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 12mm x 32mm x 10mm/Metric

ID (inner diameter)/Bore: 12mm

OD (outer diameter): 32mm

Width/Height/thickness: 10mm

Size: 12 x 32 x 10 mm

Quantity: Pair of Bearings

Dynamic load rating Cr: 13,000 N

Static load rating Cor: 7,750 N

Limiting Speed:

Grease Lubrication: 29,000 RPM

Oil Lubrication: 40,000 RPM

Made in Japan Dimensions d D B r r1 a 12mm 32mm 10mm 0.6mm 0.3mm -2.5mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7201CYDUP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Bearings

Share your knowledge of this product. Be the first to write a review »

7201CYDUP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Bearings

Bearings Canada