>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Metric Bearings > 17mm inner diameter Bearings >

7203CYDUP4 Nachi Angular Contact Bearing 17x40x12 Abec-7 Bearings
7203CYDUP4 Nachi Angular Contact Bearing 17x40x12 Abec-7 Bearings


 
Our Price: CA$455.37
  • Item: 7203CYDUP4 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 17mm x 40mm x 12mm/Metric


    Product Code: KIT10891
  • Qty:

    Description
     
    7203CYDUP4 Nachi Angular Contact Abec-7 Ball Bearing
    17mm x 40mm x 12mm
    Made in Japan


    "7203CYDUP4
    "7203CYDUP4
    "7203CYDUP4

    7203CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

    • Item: 7203CYDUP4 Angular Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Polyamide resin cage
    • Quality: ABEC-7 (P4 quality)
    • Dimensions: 17mm x 40mm x 12mm/Metric
    • Bearing Inner Diameter: 17mm
    • Bearing Outer Diameter: 40mm
    • Width/Height/thickness; 12mm
    • Size: 17 x 40 x 12 mm
    • Quantity: One Bearing
    • Made in Japan


    Dimensions
    dDBrr1a
    17mm40mm12mm0.6mm 0.3mm -2.7mm

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    Kit10891


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.