Products

Enter Your Email To Sign Up
For Our E-Newsletter:

Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7204 Nachi Angular Contact Bearing 20x47x14 C3 Japan Bearings

7204 Nachi Angular Contact Bearing 20x47x14 C3 Japan

Our Price: CA$52.63

Item: 7204 Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Steel Cage

Dimensions: 20mm x 47mm x 14mm/Metric

ID (inner diameter)/Bore: 20mm

Product Code: 7204-NACHI-20X47X14-C3-JAPAN

Qty:

Description

7204 Nachi Angular Ball Bearing 40 Contact Angle & Steel Cage Made in Japan 7204 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, 7204 has Steel Cage, Made in Japan, inner diameter is 20mm, outer diameter is 47mm and width is 14mm.

Item: 7204 Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Steel Cage

Dimensions: 20mm x 47mm x 14mm/Metric

ID (inner diameter)/Bore: 20mm

OD (outer diameter): 47mm

Width/Height/thickness: 14mm

Size: 20mm x 47mm x 14mm

Quantity: One Bearing

Dynamic load rating Cr: 14,500 N

Static load rating Cor: 8,300 N

Limiting Speed:

Grease Lubrication: 13,000 RPM

Oil Lubrication: 18,000 RPM

Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7204 Nachi Angular Contact Bearing 20x47x14 C3 Japan Bearings

Share your knowledge of this product. Be the first to write a review »

7204 Nachi Angular Contact Bearing 20x47x14 C3 Japan Bearings

Bearings Canada