>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7204CYP4 Nachi Angular Contact Bearing 20x47x14 Abec-7 Japan Bearings
7204CYP4 Nachi Angular Contact 20x47x14 Abec-7 Japan
7204CYP4 Nachi Angular Contact 20x47x14 Abec-7 Japan


 
Our Price: CA$289.23
  • Item: 7204CYP4 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7
  • Dimensions: 20mm x 47mm x 17mm/Metric


    Product Code: 7204CYP4-NACHI-204714-JAPAN
  • Qty:

    Description
     

    Precision Rolling Bearing 7204CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 20mm x 47mm x 17mm Made in Japan 7204CYP4 Nachi Angular Ball Bearing, Bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 20mm, outer diameter is 47mm and width is 17mm.

  • Item: 7204CYP4 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7
  • Dimensions: 20mm x 47mm x 17mm/Metric
  • Bearing Inner Diameter: 20mm
  • Bearing Outer Diameter: 47mm
  • Width/Height/thickness; 17mm
  • Size: 20 x 47 x 17 mm
  • Quantity: One Bearing
  • Made in Japan Dimensions d D B r r1 20mm 47mm 17mm 1mm 0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7204CYP4 Nachi Angular Contact Bearing 20x47x14 Abec-7 Japan Bearings



  • Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.