>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Metric Bearings > 30mm inner diameter Bearings >

7206 Nachi Angular Contact Bearing 30x62x16 C3 Japan Bearings
7206 Nachi Angular Contact Bearing 30x62x16 C3 Japan
7206 Nachi Angular Contact Bearing 30x62x16 C3 Japan


 
Our Price: $23.24
  • Item: 7206 Nachi Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 30mm x 62mm x 16mm/Metric
  • ID (inner diameter)/Bore: 30mm

    Product Code: 7206-NACHI-30X62X16-C3-JAPAN
  • Qty:

    Description
     

    7206 Nachi Angular Ball Bearing 40 Contact Angle & Steel Cage 30mm x 62mm x 16mm Made in Japan 7206 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 30mm, outer diameter is 62mm and width is 16mm.

  • Item: 7206 Nachi Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 30mm x 62mm x 16mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 62mm
  • Width/Height/thickness: 16mm
  • Size: 30 x 62 x 16 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 22,500 N
  • Static load rating Cor: 14,800 N
  • Limiting Speed:
  • Grease Lubrication: 10,000 RPM
  • Oil Lubrication: 13,000 RPM
  • Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7206 Nachi Angular Contact Bearing 30x62x16 C3 Japan Bearings



  • Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.