High Precision Ball Bearings 7206CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 30mm x 62mm x 16mm Made in Japan

7206CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan. the 7206CYDUP4 inner diameter is 30mm, the 7206CYDUP4 outer diameter is 62mm, 7206CYDUP4 width is 16mm. Item: 7206CYDUP4 Angular Ball Bearings Type: Nachi Angular Ball Bearings Cage: Polyamide resin cage Quality: ABEC-7 (P4 quality) Dimensions: 30mm x 62mm x 16mm/Metric ID (inner diameter)/Bore: 30mm OD (outer diameter): 62mm Width/Height/thickness: 16mm Size: 30 x 62 x 16 mm Quantity: Pair of Bearings Dynamic load rating Cr: 37,500 N Static load rating Cor: 29,700 N Limiting Speed: Grease Lubrication: 14,000 RPM Oil Lubrication: 19,000 RPM Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10894