Nachi Angular Ball Bearings 7206CYP5 30mm x 62mm x 16mm 15 Contact Angle Polyamide resin cage Abec-5 Made in Japan

7206CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7206CYP5, the 7206CYP5 inner diameter is 30mm, the 7206CYP5 outer diameter is 62mm, 7206CYP5 width is 16mm. Item: 7206CYP5 Angular Ball Bearings Dimensions: 30*62*16 mm/Metric ID (inner diameter)/Bore=30mm OD (outer diameter D1)=62mm Width/Height/thickness=16mm 7206CYP5 Type: Nachi Angular Ball Bearings Cage: Polyamide resin cage Quality: ABEC-5 Basic Dynamic Load Cr (KN): 23.2 Size: 30mm x 62mm x 16mm Made in Japan Quantity: One Bearing 7206CYP5 d D B r r1 Basic Dynamic Load 30mm 62mm 16mm 1 0.6 23.2

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10810