>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7207BMU Nachi Angular Contact Bearing 35x72x17 Brass Cage C3 Bearings
7207BMU Nachi Angular Contact Bearing 35x72x17 Brass Cage C3 Bearings


 
Our Price: CA$81.46
  • Item: 7207BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 35mm x 72mm x 17mm/Metric


    Product Code: KIT9972
  • Qty:

    Description
     
    7207BMU Nachi Angular Ball Bearing
    40 Contact Angle
    Brass Cage & Flush Ground
    35mm x 72mm x 17mm
    Made in Japan


    "7207BMU
    "7207BMU

    7207BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 35mm, outer diameter is 72mm and width is 17mm.

    • Item: 7207BMU Nachi Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Brass Cage
    • Radial Clearance: C3
    • Dimensions: 35mm x 72mm x 17mm/Metric
    • ID (inner diameter)/Bore: 35mm
    • OD (outer diameter D1): 72mm
    • Width/Height/thickness: 17mm
    • Size: 35 x 72 x 17 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 28,000 N
    • Static load rating Cor: 19,000 N
    • Limiting Speed:
      • Grease Lubrication: 7,500 RPM
      • Oil Lubrication: 10,000 RPM
    • Made in Japan

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    Kit9972


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.