>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Anti-Friction Bearings > Metric Bearings > Bearings with Large inner diameter >

7212CYP5 Nachi Angular Contact Bearing 60x110x22:Abec-5:Japan
7212CYP5 Nachi Angular Contact Bearing 60x110x22:Abec-5:Japan


 
Our Price: CA$399.31
  • Item: 7212CYP5 Angular Ball Bearings
  • Dimensions: 60*110*22 mm/Metric
  • ID (inner diameter)/Bore=60mm
  • OD (outer diameter D1)=110mm
  • Width/Height/thickness=22mm


    Product Code: KIT10816
  • Qty:

    Description
     

    Nachi Angular Ball Bearings
    7212CYP5
    60mm x 110mm x 22mm
    15 Contact Angle
    Polyamide resin cage
    Abec-5
    Made in Japan







    7212CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7212CYP5, the 7212CYP5 inner diameter is 60mm, the 7212CYP5 outer diameter is 110mm, 7212CYP5 width is 22mm.

    • Item: 7212CYP5 Angular Ball Bearings
    • Dimensions: 60*110*22 mm/Metric
    • ID (inner diameter)/Bore=60mm
    • OD (outer diameter D1)=110mm
    • Width/Height/thickness=22mm
    • 7212CYP5 Type: Nachi Angular Ball Bearings
    • Cage: Polyamide resin cage
    • Quality: ABEC-5
    • Basic Dynamic Load Cr (KN): 64.5
    • Size: 60mm x 110mm x 22mm
    • Made in Japan
    • Quantity: One Bearing 7212CYP5
    d D B r r1 Basic Dynamic Load
    60mm 110mm 22mm 1.5 1 64.5

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    Kit10816


    Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.