7216CYP5 Nachi Angular Abec-5 Ball Bearing 15 Contact Angl Polyamide resin cage 80mm x 140mm x 26mme Made in Japan

7216CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7216CYP5, the 7216CYP5 inner diameter is 80mm, the 7216CYP5 outer diameter is 140mm, 7216CYP5 width is 26mm. Item: 7216CYP5 Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 80mm x 140mm x 26mm/Metric Bearing Inner Diameter: 80mm Bearing Outer Diameter: 140mm Bearing Width: 26mm Cage: Polyamide resin cage Quality: ABEC-5 Made in Japan Quantity: One Bearing d D B r r1 80mm 140mm 26mm 2 1

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10820