>

Enter Your Email To Sign Up
For Our E-Newsletter:



  Home > Metric Bearings > 40mm inner diameter Bearings >

7308BMU Nachi Angular Contact Bearing 40x90x23 Brass Cage C3 Bearings
7308BMU Nachi Angular Contact 40x90x23 Brass Cage C3
7308BMU Nachi Angular Contact 40x90x23 Brass Cage C3


 
Our Price: CA$122.10
  • Item: 7308BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 40mm x 90mm x 23mm/Metric


    Product Code: 7308BMU-NACHI-409023-BRASS-C3
  • Qty:

    Description
     

    7308BMU Nachi Angular Ball Bearing 40 Contact Angle Brass Cage & Flush Ground 40mm x 90mm x 23mm Made in Japan 7308BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 40mm, outer diameter is 90mm and width is 23mm.

  • Item: 7308BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 40mm x 90mm x 23mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 23mm
  • Size: 40 x 90 x 23 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 46,000 N
  • Static load rating Cor: 31,000 N
  • Limiting Speed:
  • Grease Lubrication: 6,300 RPM
  • Oil Lubrication: 8,500 RPM
  • Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7308BMU Nachi Angular Contact Bearing 40x90x23 Brass Cage C3 Bearings



  • Share your knowledge of this product. Be the first to write a review »

    Bearings Canada

    Copyright ©  Bearings Canada .com. All Rights Reserved.

    Built with Volusion.