NJ316 Nachi Cylindrical Roller Bearing Steel Cage 80mm x 170mm x 39mm Made in Japan

NJ316 Nachi Cylindrical Roller Bearings, Steel Cage, Made in Japan, the NJ316 inner diameter is 80mm, the NJ316 outer diameter is 170mm, NJ316 width is 39mm. Item: NJ316 Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Steel Cage Dimensions: 80mm x 170mm x 39mm/Metric Inner Diameter: 80mm Outer Diameter: 170mm Width: 39mm Size: 80 x 170 x 39 mm Dynamic load rating Cr: 190,000 N Static load rating Cor: 207,000 N Limiting Speed: Grease Lubrication: 3,600 RPM Oil Lubrication: 4,300 RPM Quantity: One Bearing Made in Japan

Nachi Cylindrical Roller Bearings

Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges)
NH,NP,NUP,NUH : integral and loose ribs
NN,NNU : double-row bearings
Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.

Kit10378