NU220MY Nachi Cylindrical Roller Bearing Bronze Cage 100mm x 180mm x 34mm Made in Japan

NU220MY Nachi Cylindrical Roller Bearing, Bronze Cage, Made in Japan, the NU220MY inner diameter is 100mm, the NU220MY outer diameter is 180mm and the NU220MY width is 34mm. Item: NU220MY Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Bronze Cage Dimensions: 100mm x 180mm x 34mm/Metric ID (inner diameter)/Bore: 100mm OD (outer diameter): 180mm Width/Height/thickness: 34mm Size: 100mm x 180mm x 34mm Quantity: One Bearing Dynamic load rating Cr: 183,000 N Static load rating Cor: 217,000 N Limiting Speed: Grease Lubrication: 3,600 RPM Oil Lubrication: 4,300 RPM Made in Japan

Nachi Cylindrical Roller Bearings

Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges)
NH,NP,NUP,NUH : integral and loose ribs
NN,NNU : double-row bearings
Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.

Kit10298