Description
7003CYDUP4BNLS Nachi Angular Abec-7 Ball Bearings 17mm x 35mm x 10mm 15 Contact Angle Polyamide resin cage Made in Japan 7003CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7003CYDUP4BNLS inner diameter is 17mm, 7003CYDUP4BNLS outer diameter is 35mm, 7003CYDUP4BNLS width is 10mm.
Item: 7003CYDUP4BNLS Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 17mm x 35mm x 10mm/Metric Bearing Inner Diameter: 17mm Bearing Outer Diameter: 35mm Bearing Width: 10mm Size: 17 x 35 x 10 mm Cage: Polyamide resin cage Quality: ABEC-7 Basic Dynamic Load Cr (KN): 7.00 Made in Japan Quantity: One Bearing d D B r r1 17mm 35mm 10mm 0.3 0.15 7.00 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7003CYDUP4BNLS Nachi Angular Contact Bearing 17x35x10:Abec-7:Japan
