Description
7007CYDUP4BNLS Nachi Angular Abec-7 Ball Bearing 35mm x 62mm x 14mm 15 Contact Angle Polyamide resin cage Made in Japan 7007CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7007CYDUP4BNLS inner diameter is 35mm, 7007CYDUP4BNLS outer diameter is 62mm, 7007CYDUP4BNLS width is 14mm.
Item: 7007CYDUP4BNLS Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 35mm x 62mm x 14mm/Metric Bearing Inner Diameter: 35mm Bearing Outer Diameter: 62mm Bearing Width: 14mm Size: 35 x 62 x 14 mm Quality: ABEC-7 Cage: Polyamide resin cage Basic Dynamic Load Cr (KN): 19.3 Made in Japan Quantity: One Bearing d D B r r1 35mm 62mm 14mm 1 0.6 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
7007CYDUP4BNLS Nachi Angular Contact Bearing 35x62x14:Abec-7:Japan
