Description
High Precision Ball Bearing BNH017TU Nachi High Speed Angular Spindle Ball Bearing 15 degrees Contact Angle Abec-7 85mm x 130mm x 22mm Made in Japan BNH017TU Nachi High Speed Angular Spindle, Super precision Angular Ball Bearings with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 quality and made in Japan.
Item: BNH017TU Ball Bearing Type: Nachi Angular Spindle Ball Bearing Cage: Phenolic cage Quality: ABEC-7 Dimensions: 85mm x 130mm x 22mm/Metric ID (inner diameter)/Bore: 85mm OD (outer diameter): 130mm Width/Height/thickness: 22mm Size: 85 x 130 x 22 mm Quantity: One Bearing Dynamic load rating Cr: 35,500 N Static load rating Cor: 40,000 N Limiting Speed: Grease Lubrication: 11,000 RPM Oil Lubrication: 16,000 RPM Made in Japan Dimensions d D B r r1 85mm 130mm 22mm 1.1mm 0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
BNH017TU Nachi Angular Contact Spindle Bearing ABEC 7 85x130x22