Description
7202CYP5 Nachi Angular Ball Bearing 15mm x 35mm x 11mm 15 Contact Angle Polyamide resin cage Abec-5 Made in Japan 7202CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7202CYP5 inner diameter is 15mm, 7202CYP5 outer diameter is 35mm, 7202CYP5 width is 11mm.
Item: 7202CYP5 Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 15mm x 35mm x 11mm/Metric Bearing Inner Diameter: 15mm Bearing Outer Diameter: 35mm Bearing Width: 11mm Size: 15mm x 35mm x 11mm Quality: ABEC-5 Cage: Polyamide resin cage Basic Dynamic Load Cr (KN): 8.70 Made in Japan Quantity: One Bearing d D B r r1 15mm 35mm 11mm 0.6 0.3 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads. Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan
