Description
High Precision Ball Bearing 7014CYP4 Nachi Angular Ball Bearing 15 Contact Angle Abec-7 70mm x 110mm x 20mm Made in Japan 7014CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan.
Item: 7014CYP4 Nachi Ball Bearing Type: Nachi Angular Ball Bearing Cage: Polyamide resin cage Quality: ABEC-7 (P4 quality) Dimensions: 70mm x 110mm x 20mm/Metric ID (inner diameter)/Bore: 70mm OD (outer diameter): 110mm Width/Height/thickness: 20mm Size: 70 x 110 x 20 mm Limiting Speed: Grease Lubrication: 8,900 RPM Oil Lubrication: 12,000 RPM Made in Japan Quantity: One Bearing Dimensions d D B r r1 a 70mm 110mm 20mm 1.1mm 0.6mm -0.7mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
7014CYP4 Nachi Angular Contact Bearing 70x110x20 Abec-7 Japan Bearings
