Description
7020CYP5 Nachi Angular Ball Bearings 100mm x 150mm x 24mm Made in Japan 7020CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7020CYP5, the 7020CYP5 inner diameter is 100mm, the 7020CYP5 outer diameter is 150mm, 7020CYP5 width is 24mm.
Item: 7020CYP5 Angular Ball Bearing Type: Nachi Angular Ball Bearing Quality: ABEC-5 Cage: Polyamide resin cage Dimensions: 100mm x 150mm x 24mm/Metric Bearing Inner Diameter: 100mm Bearing Outer Diameter: 150mm Bearing Width: 24mm Size: 100 x 150 x 24 mm Basic Dynamic Load CR: 76,000 N Basic Static Load COR: 78,000 N Made in Japan Quantity: One Bearing Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
7020CYP5 Nachi Angular Contact Bearing 100x150x24:Abec-5:Japan
