Description
7214CYP5 Nachi Angular Abec-5 Ball Bearing 15 Contact Angle Polyamide resin cage 70mm x 125mm x 24mm Made in Japan 7214CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7214CYP5, the 7214CYP5 inner diameter is 70mm, the 7214CYP5 outer diameter is 125mm, 7214CYP5 width is 24mm.
Item: 7214CYP5 Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 70mm x 125mm x 24mm/Metric Bearing Inner Diameter: 70mm Bearing Outer diameter: 125mm Bearing Width: 24mm Cage: Polyamide resin cage Quality: ABEC-5 Size: 70mm x 125mm x 24mm Made in Japan Quantity: One Bearing d D B r r1 70mm 125mm 24mm 1.5 1 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
7214CYP5 Nachi Angular Contact Bearing 70x125x24:Abec-5:Japan