RU124UU-CC0-X With the Cross-Roller Ring, cylindrical rollers are arranged crosswise.This design allows just one bearing to receive loads in all directions including, radial, axial and moment load. The inner and outer rings are designed to be separable, the bearing clearance can be adjusted. In addition, highly accurate rotary motion is ensured through adjusting the bearing clearance to provide a preload. .

• Item: RU124UU-CC0-X Ball Bearings
• Type: Crossed Roller Bearing
• Closures: Open
• CC0 = is the radial clearance
• X = Tapped Through Holes
• Dimensions: 80mmx165mmx22mm/Metric
• Inner Diameter (ID): 80mm
• Outer Diameter (OD): 165mm
• Width/Height/Bridth (W/H/B): 22mm
• dp: 124 mm Roller pitch circle dia.
• PCD1: 97 mm 10-M5 through Mounting hole
• PCD2: 148 mm 10-??5.5 drilled through Mounting hole, ??9.5 counter bore depth 5.4

RU148UU-CC0-X With the Cross-Roller Ring, cylindrical rollers are arranged crosswise.This design allows just one bearing to receive loads in all directions including, radial, axial and moment load. The inner and outer rings are designed to be separable, the bearing clearance can be adjusted. In addition, highly accurate rotary motion is ensured through adjusting the bearing clearance to provide a preload. .

• Item: RU148UU-CC0-X Ball Bearings
• Type: Crossed Roller Bearing
• Closures: Open
• CC0 = is the radial clearance
• X = Tapped Through Holes
• Dimensions: 90mmx210mmx25mm/Metric/Metric
• Inner Diameter (ID): 90mm
• Outer Diameter (OD): 210mm
• Width/Height/Bridth (W/H/B): 25mm
• dp: 148 mm Roller pitch circle dia.
• PCD1: 112 mm 10-M5 through Mounting hole
• PCD2: 187 mm 12-??9 drilled through Mounting hole, ??14 counter bore depth 8.6
• Quantity: One Bearing

RU178UU-CCO-X Cross Roller Slewing Ring Tapped through holes Turntable Bearing , cylindrical rollers are arranged crosswise.This design allows just one bearing to receive loads in all directions including, radial, axial and moment load. The inner and outer rings are designed to be separable, the bearing clearance can be adjusted. In addition, highly accurate rotary motion is ensured through adjusting the bearing clearance to provide a preload. .

• Item: RU178UU-CCO-X Ball Bearings
• Type: Cross Roller Slewing Ring Tapped through holes Turntable Bearing
• Closures: Sealed
• Type: X = Tapped Through Holes
• CC0 = is the radial Clearance
• Dimensions: 115mmx240mmx28mm/Metric
• Inner Diameter (ID): 115mm
• Outer Diameter (OD): 240mm
• Width/Height/Bridth (W/H/B): 28mm
• dp: 178mm Roller pitch circle dia.
• PCD1: 139 mm 12-M8 through Mounting hole
• PCD2: 217 mm 12-??9.5 drilled through Mounting hole, ??14 counter bore depth 8.6

RU228UU-CCO-X Cross Roller Slewing Ring Tapped through holes Turntable Bearing, cylindrical rollers are arranged crosswise.This design allows just one bearing to receive loads in all directions including, radial, axial and moment load. The inner and outer rings are designed to be separable, the bearing clearance can be adjusted. In addition, highly accurate rotary motion is ensured through adjusting the bearing clearance to provide a preload. .

• Item: RU228UU-CCO-X Ball Bearings
• Type: Cross Roller Slewing Ring Tapped through holes Turntable Bearing
• Closures: Sealed
• Dimensions: 160x295x35mm/Metric
• CC0 = is the radial clearance
• X = Tapped Through Holes
• Inner Diameter (ID): 160mm
• Outer Diameter (OD): 295mm
• Width/Height/Bridth (W/H/B): 35mm
• dp: 228mm Roller pitch circle dia.
• PCD1: 184mm 12-M10 through Mounting hole
• PCD2: 270mm 12-??11 drilled through Mounting hole, ??17.5 counter bore depth 10.8